Numerical Study of Thin-Walled Polymer Composite Part Quality When Manufactured Using Vacuum Infusion with Various External Pressure Controls.

The article presents the results of modeling various modes of vacuum infusion molding of thin-walled polymer-composite structures of arbitrary geometry. The small thickness of the manufactured structures and the fixation of their back surface on the rigid surface of the mold made it possible to significantly simplify the process model, which takes into account the propagation of a thermosetting resin with changing rheology in a compressible porous preform of complex 3D geometry, as well as changes in boundary conditions at the injection and vacuum ports during the post-infusion molding stage. In the four modes of vacuum-infusion molding studied at the post-infusion stage, the start time, duration and magnitude of additional pressure on the open surface of the preform and in its vacuum port, as well as the state of the injection gates, were controlled (open-closed). The target parameters of the processes were the magnitude and uniformity of the distribution of the fiber volume fraction, wall thickness, filling of the preform with resin and the duration of the process. A comparative analysis of the results obtained made it possible to identify the most promising process modes and determine ways to eliminate undesirable situations that worsen the quality of manufactured composite structures. The abilities of the developed simulation tool, demonstrated by its application to the molding process of a thin-walled aircraft structure, allow one to reasonably select a process control strategy to obtain the best achievable quality objectives.

Application of KNN and ANN Metamodeling for RTM Filling Process Prediction.

Process simulation is frequently adopted to facilitate the optimization of the resin transfer molding process. However, it is computationally costly to simulate the multi-physical, multi-scale process, making it infeasible for applications involving huge datasets. In this study, the application of K-nearest neighbors and artificial neural network metamodels is proposed to build predictive surrogate models capable of relating the mold-filling process input-output correlations to assist mold designing. The input features considered are the resin injection location and resin viscosity. The corresponding output features investigated are the number of vents required and the resultant maximum injection pressure. Upon training, both investigated metamodels demonstrated desirable prediction accuracies, with a low prediction error range of 5.0% to 15.7% for KNN metamodels and 6.7% to 17.5% for ANN metamodels. The good prediction results convincingly indicate that metamodeling is a promising option for composite molding applications, with encouraging prospects for data-intensive applications such as process digital twinning.

New Marginal Spectrum Feature Information Views of Humpback Whale Vocalization Signals Using the EMD Analysis Methods.

Marginal spectrum (MS) feature information of humpback whale vocalization (HWV) signals is an interesting and significant research topic. Empirical mode decomposition (EMD) is a powerful time-frequency analysis tool for marine mammal vocalizations. In this paper, new MS feature innovation information of HWV signals was extracted using the EMD analysis method. Thirty-six HWV samples with a time duration of 17.2 ms were classified into Classes I, II, and III, which consisted of 15, 5, and 16 samples, respectively. The following ratios were evaluated: the average energy ratios of the 1 first intrinsic mode function (IMF1) and residual function (RF) to the referred total energy for the Class I samples; the average energy ratios of the IMF1, 2nd IMF (IMF2), and RF to the referred total energy for the Class II samples; the average energy ratios of the IMF1, 6th IMF (IMF6), and RF to the referred total energy for the Class III samples. These average energy ratios were all more than 10%. The average energy ratios of IMF1 to the referred total energy were 9.825%, 13.790%, 4.938%, 3.977%, and 3.32% in the 2980-3725, 3725-4470, 4470-5215, 10,430-11,175, and 11,175-11,920 Hz bands, respectively, in the Class I samples; 14.675% and 4.910% in the 745-1490 and 1490-2235 Hz bands, respectively, in the Class II samples; 12.0640%, 6.8850%, and 4.1040% in the 2980-3725, 3725-4470, and 11,175-11,920 Hz bands, respectively, in the Class III samples. The results of this study provide a better understanding, high resolution, and new innovative views on the information obtained from the MS features of the HWV signals.

Multi-Criteria Decision Approach to Design a Vacuum Infusion Process Layout Providing the Polymeric Composite Part Quality.

The increasingly widespread use of vacuum assisted technologies in the manufacture of polymer-composite structures does not always provide the required product quality and repeatability. Deterioration of quality most often appears itself in the form of incomplete filling of the preform with resin as a result of the inner and outer dry spot formation, as well as due to premature gelation of the resin and blockage of the vacuum port. As experience shows, these undesirable phenomena are significantly dependent on the location of the resin and vacuum ports. This article presents a method for making a decision on the rational design of a process layout. It is based on early forecasting of its objectives in terms of quality and reliability when simulating its finite element model, on the correlation analysis of the preliminary and final quality assessments, as well as on the study of the cross-correlation of a group of early calculated sub-criteria. The effectiveness of the proposed method is demonstrated by the example of vacuum infusion of a 3D thin-walled structure of complex geometry.

Generalized Frequency Division Multiplexing-Based Low-Power Underwater Acoustic Image Transceiver.

In this paper, a low-power underwater acoustic (UWA) image transceiver based on generalized frequency division multiplexing (GFDM) modulation for underwater communication is proposed. The proposed transceiver integrates a low-density parity-check code error protection scheme, adaptive 4-quadrature amplitude modulation (QAM) and 16-QAM strategies, GFDM modulation, and a power assignment mechanism in an UWA image communication environment. The transmission bit error rates (BERs), the peak signal-to-noise ratios (PSNRs) of the received underwater images, and the power-saving ratio (PSR) of the proposed transceiver obtained using 4-QAM and 16-QAM, with perfect channel estimation, and channel estimation errors (CEEs) of 5%, 10%, and 20% were simulated. The PSNR of the received underwater image is 44.46 dB when using 4-QAM with a CEE of 10%. In contrast, PSNR is 48.79 dB when using 16-QAM with a CEE of 10%. When BER is 10-4, the received UW images have high PSNR values and high resolutions, indicating that the proposed transceiver is suitable for underwater image sensor signal transmission.

On the Directivity of Lamb Waves Generated by Wedge PZT Actuator in Thin CFRP Panel.

This paper addresses investigation of guided-wave excitation by angle-beam wedge piezoelectric (PZT) transducers in multilayered composite plate structure with orthotropic symmetry of the material. The aim of the present study is to determine the capability of such actuators to provide the controlled generation of an acoustic wave of a desirable type with the necessary wavelength, propagation distance and directivity. The studied CFRP (Carbon Fiber Reinforced Plastic) panel is considered to be homogenous, with effective elastic moduli and anisotropic structural damping, whose parameters were determined experimentally. According to the results of dispersion analysis and taking into account the data of wave attenuation in a highly damping CFRP composite, the two types of propagating waves A0 and S0 were considered theoretically and experimentally in the frequency range of 10-100 kHz. Using the results of a previous study, we reconstructed the structure of the wedge actuator, to develop its finite-element (FE) model, and a modal analysis was carried out that revealed the most intense natural vibration modes and their eigenfrequencies within the frequency range used. Both experimental and numerical studies of the generation, propagation, directivity and attenuation of waves in the orthotropic composite panel under study revealed the influence of the angular orientation of the actuator on the formation of wave patterns and allowed to determine the capabilities of the wave's directivity control.

Integrator subunit 4 is a 'Symplekin-like' scaffold that associates with INTS9/11 to form the Integrator cleavage module.

Integrator (INT) is a transcriptional regulatory complex associated with RNA polymerase II that is required for the 3'-end processing of both UsnRNAs and enhancer RNAs. Integrator subunits 9 (INTS9) and INTS11 constitute the catalytic core of INT and are paralogues of the cleavage and polyadenylation specificity factors CPSF100 and CPSF73. While CPSF73/100 are known to associate with a third protein called Symplekin, there is no paralog of Symplekin within INT raising the question of how INTS9/11 associate with the other INT subunits. Here, we have identified that INTS4 is a specific and conserved interaction partner of INTS9/11 that does not interact with either subunit individually. Although INTS4 has no significant homology with Symplekin, it possesses N-terminal HEAT repeats similar to Symplekin but also contains a ß-sheet rich C-terminal region, both of which are important to bind INTS9/11. We assess three functions of INT including UsnRNA 3'-end processing, maintenance of Cajal body structural integrity, and formation of histone locus bodies to conclude that INTS4/9/11 are the most critical of the INT subunits for UsnRNA biogenesis. Altogether, these results indicate that INTS4/9/11 compose a heterotrimeric complex that likely represents the Integrator 'cleavage module' responsible for its endonucleolytic activity.

Cajal bodies are linked to genome conformation.

The mechanisms underlying nuclear body (NB) formation and their contribution to genome function are unknown. Here we examined the non-random positioning of Cajal bodies (CBs), major NBs involved in spliceosomal snRNP assembly and their role in genome organization. CBs are predominantly located at the periphery of chromosome territories at a multi-chromosome interface. Genome-wide chromosome conformation capture analysis (4C-seq) using CB-interacting loci revealed that CB-associated regions are enriched with highly expressed histone genes and U small nuclear or nucleolar RNA (sn/snoRNA) loci that form intra- and inter-chromosomal clusters. In particular, we observed a number of CB-dependent gene-positioning events on chromosome 1. RNAi-mediated disassembly of CBs disrupts the CB-targeting gene clusters and suppresses the expression of U sn/snoRNA and histone genes. This loss of spliceosomal snRNP production results in increased splicing noise, even in CB-distal regions. Therefore, we conclude that CBs contribute to genome organization with global effects on gene expression and RNA splicing fidelity.

PA28γ is a novel corepressor of HTLV-1 replication and controls viral latency.

UNLABELLED: The establishment of a latent reservoir by human tumor viruses is a vital step in initiating cellular transformation and represents a major shortcoming to current therapeutic strategies and the ability to eradicate virus-infected cells. Human T-cell leukemia virus type 1 (HTLV-1) establishes a lifelong infection and is linked to adult T-cell leukemia lymphoma (ATLL). Here, we demonstrate that HTLV-1 p30 recruits the cellular proteasome activator PA28γ onto the viral tax/rex mRNA to prevent its nuclear export and suppress virus replication. Interaction of p30 with a PA28γ retaining fully functional proteasome activity is required for p30's ability to repress HTLV-1. Consistently, HTLV-1 molecular clones replicate better and produce more virus particles in PA28γ-deficient cells. These results define a unique and novel role for the cellular factor PA28γ in the control of nuclear RNA trafficking and HTLV-1­induced latency. Importantly, knockdown of PA28γ expression in ATLL cells latently infected with HTLV-1 reactivates expression of viral tax/rex RNA and the Tax protein. Because Tax is the most immunogenic viral antigen and triggers strong CTL responses, our results suggest that PA28γ-targeted therapy may reactivate virus expression from latently infected cells and allow their eradication from the host. KEY POINTS: PA28γ acts as a co-repressor of HTLV-1 p30 to suppress virus replication and is required for the maintenance of viral latency. HTLV-1 has evolved a unique function mediated by its posttranscriptional repressor p30, which is not found in HTLV-2.

SRSF1 regulates the assembly of pre-mRNA processing factors in nuclear speckles.

The mammalian cell nucleus is compartmentalized into nonmembranous subnuclear domains that regulate key nuclear functions. Nuclear speckles are subnuclear domains that contain pre-mRNA processing factors and noncoding RNAs. Many of the nuclear speckle constituents work in concert to coordinate multiple steps of gene expression, including transcription, pre-mRNA processing and mRNA transport. The mechanism that regulates the formation and maintenance of nuclear speckles in the interphase nucleus is poorly understood. In the present study, we provide evidence for the involvement of nuclear speckle resident proteins and RNA components in the organization of nuclear speckles. SR-family splicing factors and their binding partner, long noncoding metastasis-associated lung adenocarcinoma transcript 1 RNA, can nucleate the assembly of nuclear speckles in the interphase nucleus. Depletion of SRSF1 in human cells compromises the association of splicing factors to nuclear speckles and influences the levels and activity of other SR proteins. Furthermore, on a stably integrated reporter gene locus, we demonstrate the role of SRSF1 in RNA polymerase II-mediated transcription. Our results suggest that SR proteins mediate the assembly of nuclear speckles and regulate gene expression by influencing both transcriptional and posttranscriptional activities within the cell nucleus.

Dynamic force-induced direct dissociation of protein complexes in a nuclear body in living cells.

Despite past progress in understanding mechanisms of cellular mechanotransduction, it is unclear whether a local surface force can directly alter nuclear functions without intermediate biochemical cascades. Here we show that a local dynamic force via integrins results in direct displacements of coilin and SMN proteins in Cajal bodies and direct dissociation of coilin-SMN associated complexes. Spontaneous movements of coilin increase more than those of SMN in the same Cajal body after dynamic force application. Fluorescence resonance energy transfer changes of coilin-SMN depend on force magnitude, an intact F-actin, cytoskeletal tension, Lamin A/C, or substrate rigidity. Other protein pairs in Cajal bodies exhibit different magnitudes of fluorescence resonance energy transfer. Dynamic cyclic force induces tiny phase lags between various protein pairs in Cajal bodies, suggesting viscoelastic interactions between them. These findings demonstrate that dynamic force-induced direct structural changes of protein complexes in Cajal bodies may represent a unique mechanism of mechanotransduction that impacts on nuclear functions involved in gene expression.

Nucleation of nuclear bodies by RNA.

The biogenesis of the many functional compartments contained in the mammalian cell nucleus is poorly understood. More specifically, little is known regarding the initial nucleation step required for nuclear body formation. Here we show that RNA can function as a structural element and a nucleator of nuclear bodies. We find that several types of coding and noncoding RNAs are sufficient to de novo assemble, and are physiologically enriched in, histone locus bodies (with associated Cajal bodies), nuclear speckles, paraspeckles and nuclear stress bodies. Formation of nuclear bodies occurs through recruitment and accumulation of proteins resident in the nuclear bodies by nucleating RNA. These results demonstrate that transcription is a driving force in nuclear body formation and RNA transcripts can function as a scaffold in the formation of major nuclear bodies. Together, these data suggest that RNA-primed biogenesis of nuclear bodies is a general principle of nuclear organization.

Activation of beta-catenin signaling pathways by classical G-protein-coupled receptors: mechanisms and consequences in cycling and non-cycling cells.

Wnt signaling pathways are some of the most intensely studies in all of biology. Recently, a number of classical heterotrimeric G protein coupled receptors (GPCRs) have been shown to activate the canonical Wnt pathway, culminating in the stabilization of beta-catenin and induction of transcription of genes regulated by the Tcf/Lef family of transactivators. However, mechanisms by which these GPCRs accomplish this differ in key ways, and in some circumstances, the phenotypes produced are novel. Herein, we will examine mechanisms by which classical GPCRs interact with the canonical Wnt pathway, culminating in its activation, and describe the consequences of this activation, focusing on the heart. In the heart, the contractile cells, or cardiomyocytes, are terminally differentiated and virtually exclusively grow by increasing cell size (hypertrophy) rather than cell number, and we will describe how GPCR-mediated activation of the canonical pathway can drive this process.